Esico Soldering Pots
Esico Soldering Pots are general purpose solder pots. They are designed for continuous production requirements. The cast iron crucibles are designed for operator convenience, comfort and high volum production. These Solder Pots are supplied with three conductor cordset.

Model 12T, 20 and 36 are designed for Dip Soldering of individual Wire Leads. 12T model comes with a thermostate temperature control.

Model 37T and 70T are designed for Dip Soldering and Tinning of larger Parts and when more heat is required. They are equipped with Thermostat temperature control.

Model 75 and 80T are used extensively for short run soldering and desoldering of through hole printed circuit boards. Model 80T comes with a thermostate temperature control.

Model 71T is a large capacity solder pot with deep crucible for long parts. It is equipped with Thermostat temperature control and Dross Tray.
12 20 36 37 70 75 80T
12T 20 36 37T 70T 71T 75 80T
Round Crucible
Part Number Watt Max. Temp. Capacity Inside Dimension Inside Depth Price Qty Purchase
12T 200 W 750 °F 3/4 lbs 1 9/16" Diameter 1 1/2" $ 294.00
20 250 W 1200 °F 1 1/4 lbs 2" Diameter 1 1/2" $ 399.00
36 250 W 750 °F 2 1/4 lbs 2 1/2" Diameter 1 3/4" $ 179.00
37T 650 W 800 °F 5 lbs 3 1/2" Diameter 1 3/4" $ 349.98
70T 650 W 750 °F 9 lbs 4 3/4" Diameter 1 3/4" $ 369.00
71T 1000W 900 °F 9 1/2 lbs 3 1/8" Diameter 4 1/4" $ 549.00
12T-LF 200 W 750 °F 3/4 lbs 1 9/16" Diameter 1 1/2" $ 379.00
Square and Rectagular Crucible
Part Number Watt Max. Temp. Capacity Inside Dimension Inside Depth Price Qty Purchase
75 650 W 750 °F 11 3/4 lbs 4 3/4"x4 3/4" 1 3/4" $ 278.00
80T 1200 W 650 °F 33 lbs 6"x12" 1 7/8" $ 799.98
 



Copyright © 2017 solderpot.com. All rights Reserved. Please mail all inquiries & comments to: info@solderpot.com
Terms and Conditions
Masking Tape | Electronic Supplies | ESD Products | FingerCots