American Beauty Solder Pots
American Beauty Solder Pots are Lead Free Compatible and have industry wide recognition for superior performance. Some of the feautures include Dross skimmer. Dross skimmers are safer and more efficient than paddles, spoons or sticks that contaminate solder and lower temperature. Some of the common features are:
  • Cast Iron Crucible
  • Wide lipped for easy fixture mounting.
  • Uniform Solder termperature in crucible
  • Internal removable dross skimmer for increased operator safety
  • 120 Volts (240 V Models are available upon request)
Model 300 is used for tinning the ends of stranded wire leads, pre-tinning electrical parts, re-tinning soldering tips and dip soldering for small Printed Circuit Boards.
Model 600 is the same as Model 300 except more capacity.
Model 675 is MIL SPEC model designed for small printed circuit boards.

Esico Solder Pots
Esico Solder Pots are Lead Free Compatible and designed for continuous production requirements. The cast iron crucibles are designed for operator convenience, comfort and high volum production. These Solder Pots are supplied with three conductor cordset.
Model 12, 20 and 36 are designed for Dip Soldering of individual Wire Leads.
Model 37 and 70 are designed for Dip Soldering and Tinning of larger Parts and when more heat is required.
Model 75 and 80 are used extensively for short run soldering and desoldering of through hole printed circuit boards.
Model 71T is a large capacity solder pot with deep crucible for long parts. It is equipped with Thermostat temperature control and Dross Tray.

Plato Solder Pots
Plato Solder Pots are Lead Free Compatible, Digitally or mechanically Controlled and exceeds the requirements of Military Specification ANSI (J-STD-001B). The solder pot has a temperature range from ambient to 925F (496C). Standard features include:
  • Precision temperature controlled to 5F ( 2.75C)
  • Capacity from 2 lbs to 32lbs depending on the model
  • Removable dross tray for easy cleaning.
  • Three-wire, grounded UL listed cord.
  • A new solid state controller that limits transient voltage spiking
  • LCD for digitally controlled pots displays preset temperature and operating temperature
  • Safety warm up crucible cover
  • Adjustable leveling feet
  • 120 Volts (240 V Models are available upon request)



Copyright © 2017 solderpot.com. All rights Reserved. Please mail all inquiries & comments to: info@solderpot.com
Terms and Conditions
Masking Tape | Electronic Supplies | ESD Products | FingerCots